Sensor Settings; Sensor On/Off; Checking Sensor Information - Pioneer SGX-CA900 Mode D'emploi

Sensor Settings

EN

Sensor On/Off

Use the procedure below to turn sensors connected to the
bike on or off.
1
On the home screen, tap the [Sensors] icon.
This displays the sensor list.
2
Tap a sensor check box to toggle it between on
and off.
A sensor connection is turned on if its check box is
selected.
• You can check information about a sensor by tapping its
sensor name.
• Sensor settings need to be configured for each bike. If this
device has multiple bikes registered, you need to configure
sensor settings for each of the registered bikes.
Ü Bike Select (page 46)
48

Checking Sensor Information

Use the procedure below to check connected sensor device
information and to check the status of a sensor.
1
On the home screen, tap the [Sensors] icon.
This displays the sensor list.
2
Tap the sensor you want to check.
This displays sensor information.
Setting Item
Device Number Shows the sensor device number.
Manufacturer Shows the sensor manufacturer ID.
Number It is not shown if it is a speed & cadence
sensor.
Error Rate Shows the error rate of data received from
the sensor.
• OK:
It is receiving the data properly from the
sensor.
• NG:
It is not receiving the data properly from
the sensor.
• Not connected:
Sensor connection is disabled.
• Processing...:
Sensor connection is enabled and the
device is searching for the sensor.
Battery Shows the sensor battery voltage when the
sensor is connected.
It is shown only when it is PowerMeter,
Pedaling Monitor L, or Pedaling Monitor R.
Delete Tap to delete the sensor from the sensor
list.
Description