Initial Setup - Pioneer SGX-CA900 Mode D'emploi

Initial Setup

EN
When you turn the device on for the first time, the Initial
Setup screen is displayed.
• You can also later change the settings you configure on the
Initial Setup screen using "System" item of "Cyclocomputer
Settings" (Ü page 42).
1
Tap [Language] and select a language.
Drag the screen and tap the language that you want to
display.
The following steps explain the procedure when you
select [English].
Selectable languages are listed below.
The screen shots here show what is displayed when
[English] is selected as the language.
• Deutsch
• English
• Español
• Français
• Italiano
• Nederlands
•
12
2
Tap [Date & Time] and set the date and the time.
Time Zone Select a time zone.
Date Enter the date.
Time Enter the time.
If the [24-Hour Format] check box (below) is
cleared, you can specify [AM] or [PM] for the
time setting.
24-Hour Format Check the box to display time in 24 hour
format.
Date Format Select the date format.
After all of the settings are the way you want, press the
(back) button to return to the Initial Setup screen.
• For information about touch panel operation and text input
methods, refer to "How to Operate the Touch Panel" (Ü
page 15).
3
Tap [Close].
The Initial Setup is finished and CycloMeter starts.