Basic Workout Flow; Basic Flow Of The Workout; Logging Start/Stop; Workout - Pioneer SGX-CA900 Mode D'emploi

Basic Workout Flow

This device is designed to log a variety of sensor data as well as GPS location data during your workout. In this device, the
beginning of the training to the end of the training is called " workout".

Basic Flow of the Workout

Lap1
[Start]
[Lap]

Logging Start/Stop

1
Press the [START/STOP] button to start
logging.
[Timer Started] is displayed.
2
Press the [START/STOP] button to stop logging.
[Timer Stopped] is displayed.
• You can start and stop logging at any time while the device
is turned on except while the device is connected to a PC or
during setting initialization.
• A logging operation can continue for up to 360,000 points.
• If the [LAP] button is pressed during logging, a lap is
recorded. Up to 300 laps can be recorded during a single
logging operation.

Workout

Lap2 Lap3
[Start]
[Lap]
[Stop]
Lap3 Lap4 Lap5
[Lap]
[Lap]
■

Logging Interval

Under initial factory default settings, the device is configured
to save various types of data at 1 second intervals when
logging.
• You can change settings so the logging interval is to be
adjusted in accordance with bike riding speed.
The logging interval becomes shorter as bike riding speed
increases and longer as riding speed decreases.
Ü Logging (page 46)
Timer
Resetting
[Lap]
(1 sec.)
[Stop]
EN
21