System - Pioneer SGX-CA900 Mode D'emploi

Cyclocomputer Settings
EN

System

Use the settings below to configure Cyclocomputer system-wide settings.
Settings marked with an asterisk (*) are initial factory defaults.
GPS
Battery
Sound
Display
Altitude Calibration
Language
Date & Time
Units
42
Setting Item
GPS Enable/Disable
GPS Speed
(GPS status)
(Battery status)
Charge Mode
Audio Volume
Audible Selection
Brightness
Background
Touchscreen Calibration
Current Altitude
Calibration Type
Setting Value
Calibration
Time Zone
Date
Time
24-Hour Format
Date Format
Distance
Altitude
Temperature
Weight
Enables* and disables GPS.
Check the box to reflect time information from GPS to the date and time of the
device.
Switches GPS Speed function on* or off. Check the box to display speed and
distance obtained from GPS.
You can select this function only when [GPS Enable/Disable] is on. Errors may
occur between displayed value and actual value depending on the signal. If the
speed sensor is connected, the value from the sensor is displayed as a priority.
Displays the GPS position status (no positioning, 2D, 3D).
Shows the device remaining battery charge and charge condition.
Ü Checking the Battery Level (page 6)
Specify the charging mode setting.
• Normal Charge*
• Boost Charge
Ü Charging Mode Setting (page 7)
Adjust the device speaker volume to one of six levels.
• 0 - 3* - 5
Turn the audible selection tone for touch panel menu item selection on* or off.
Audible selection is turned on when the check box is selected.
Adjust the display brightness
Touch the screen, adjust brightness, and then tap [OK].
Changes the background of applications and menus.
• Black
• White*
Calibrate the touch panel.
Ü Calibrating the Touch Panel (page 44)
Displays the current altitude.
Specify the altitude calibration type.
• Current Altitude*
• Sea-level Pressure
• GPS
Enter an altitude setting value.
Tap to calibrate the altitude.
Specify the device's display language.
• Deutsch
• English
• Español
• Français
• Italiano
• Nederlands
•
Specify a time zone.
Set the current date.
Set the current time.
Select the check box to display time in 24-hour format.
Select a date display format.
Specify a distance display unit.
• km*
• mile
Specify an altitude display unit.
• meter*
• feet
Specify a temperature display unit.
• Celsius*
• Fahrenheit
Specify a weight display unit.
• kg*
• lb
Description