Transferring the Data
EN
Backing up Log Data to a PC
You can transfer the log data in the built-in flash memory of
the device to your PC.
Transferred data can be analyzed using the Pioneer™
Cyclo-Sphere web service.
1
Connect the device to your PC with the
provided USB cable.
The PC will recognize the device as a mass storage
device.
•
For information about connecting the device to a PC, refer
to "Charging the Device" under "Charging" (Ü page 6).
2
Select the data you want to transfer, and then
save it anywhere on the PC.
The log data is saved in the "..\Pioneer\ Log" folder.
Save it anywhere on the PC.
The file name is the date and hour that the training log
started.
(Example: LOG_2013_04_01_08_20.db)
24
Log Data Upload to the Analysis
Service
If "Pioneer Cycle Cloud Connect" application is installed on
your PC, the log data in the devices built-in flash memory
will be automatically uploaded to the Cyclo-Sphere analysis
website.
•
Refer to the SGX-CA900 support page for instructions on
how to install "Pioneer Cycle Cloud Connect" application to
your PC.
[For American Users]
http://www.pioneerelectronics.com
[For Canadian Users (ENGLISH)]
http://www.pioneerelectronics.ca/POCEN/Support
[For Canadian Users (FRENCH)]
http://www.pioneerelectronics.ca/POCFR/Soutien
[For European Users]
http://www.pioneer.eu/eur/support/page.html
•
Your PC will need Internet connection to upload your data to
Cyclo-Sphere.
1
Connect the device to your PC with the USB
cable that came with the device.
Cyclo-Sphere login ID and password input screens are
displayed.
•
Refer to the "Charging the Device" under "Charging"
(Ü page 6) for connecting the device to a PC.
2
Input the login ID and password.
The log data upload is started automatically.
•
New log data not previously uploaded to Cyclo-Sphere will
be uploaded.
•
Do not disconnect the device and the PC during upload.
3
Disconnect your device from your PC after the
uploadis completed.