Sony ZV-E10 Guide De Démarrage page 5

Charging the battery pack
1
Turn the power off.
If the camera is turned on, the battery pack will not be charged.
2
Connect the camera with the
battery pack inserted to the AC
Adaptor (supplied) using the USB
cable (supplied), and connect the
AC Adaptor to the wall outlet (wall
socket).
The charge lamp will light up when
charging starts. When the charge lamp
turns off, charging is completed.
Attaching a lens
1
Remove the body cap from the camera and the rear lens cap from the
rear of the lens.
2
Mount the lens by aligning the two white index marks (mounting
indexes) on the lens and camera.
3
While pushing the lens lightly toward the camera, turn the lens slowly
in the direction of the arrow until it clicks into the locked position.
Mounting indexes
GB
Charge lamp
GB
5