Remote Control - Domo DO335A Mode D'emploi

REMOTE CONTROL

1. Automatic mode indicator
2. Cool mode indicator
3. Dehumidify mode indicator
4. Fan mode indicator
5. Room temperature indicator
6. High speed indicator
7. Swing running indicator
8. Clock display
9. Mode button
10. Timer/ temperature up/down button
11. Speed button
12. Swing button
13. Clock buttons
14. Sleep button
15. Timer button
16. On/off power button
OPERATION
Do not operate in cooling and dehumdifying mode when room temperature exceeds
35°C.
1. Turn on the unit
Plug in, then the unit beeps twice.
Press the „on/off" button, then the unit is turned on.
The LCD displays the room temperature and operates in Automatic mode.
2. select operating mode
Press the „mode" button to select a desired mode shown below : automatic – cool
– dehumidify – fan.
3. Adjust temperature
The temperature can be set within a rainge of 15°C to 31°C by 1°C.
Press the temp up or temp down button to increase or decrease the temperature.
The unit LCD shwos the target temperature for 5 seconds and then displays the room
temperature.
4. Adjust fan speed
Press the „speed" button to select a desired fan speed shown below :
Low speed – middle speed – high speed
5. Turn off
When ou press „on/ff" button again, the unit will stop working.
1
2
3
4
5
6
7
8
29
DO335A
9
10
11
12
13
14
15
16