Using The Load Limiter Hf 31/1/A2; Markings; Maintenance - Tractel Group dynasafe HF 31/1/A2 Notice D'assemblage

3. USING THE LOAD LIMITER HF 31/1/A2

Periodically check correct operation of the load limiter and the accuracy of the threshold settings in
accordance with the application regulations.

4. MARKINGS

GB

5. MAINTENANCE

No special maintenance is required for this type of device. When performing periodic inspection, check
that the connecting cable to the control circuit is properly secured and is in good condition.
1 Identification
2 Device serial number
3 Symbol indicating "You must read the user manual"
4 Compatible wire rope diameters
5 Capacity on strand
6 Protection index
7 Microswitch interrupting capacity and voltage
8 Adjustment screw and locknut for threshold 2
9 Adjustment screw and locknut for threshold 1
10 Option: factory setting parameters for threshold 1
11 Option: factory setting parameters for threshold 2
12