Table Des Matières; Technical Data - Inokey system BT 502 Instructions D'utilisation

TECHNICAL DATA

•
Robust capacitive Area sensor of newest generation, excel-
lent image quality, high resolution 500dpi
•
Algorithms/ recognition modules of MB fingerMetrica GmbH
•
Storage capacity: 1000 fingerprints (2 or 3 Finger per person).
•
High data security: 256-bit-encryption of stored bio data.
•
Input power 8-30 VDC or VAC)
•
2 relay outputs.
•
Fast identification time (< 1,2s) and high recognition accu-
racy.
•
DC distance max. 40m (between power supply, lock and
reader).
•
Operating temperature: -30 0C to +80 0C, -22 F to +176 F.
•
Operating humidity up to 100%.
•
Bio-data and all settings remain stored in case of power loss .
•
CE qualification.
•
User Interface: 2 membrane buttons, 1 three colour LED,
Buzzer.
•
Configurable Power Down Mode; in Power Down (0,24W) or
1,2 W (constant power).
•
Current consumption with/without activation : max:
150/70mA; max. 20mA in power save mode. Max. Current
consumption of the lock depends on the power supply and
lock type which is installed. Inokey will normally use PS of the
lock.
•
Enrol/Delete via master finger/ 2 buttons - 3 master fingers
- no access time limits - if finger is recognised single relaycon-
trol output is active for 2sec.
•
IP55 waterproof housing.
•
ESD (electrostatic discharge) is made in two ways. Through
door wing via screws and through - 0 V connection. Device
is tested up to 9000 V discharge. In case of direct shock to the
electronics, automatic restart is made.
ENG
2
3 colour LED
capacitive fingerprint
sensor
function keys
1. FIRST START UP .................................................................... 3
2. PROPER USE .......................................................................... 3
3. POWER MODE ...................................................................... 4
4. CHOOSING THE RELAY OUTPUT .................................... 4
5. ADMINISTRATOR'S ROLE AND
ADMINISTRATOR ENROLMENT ......................................
6. USER FINGER ENROLMENT .............................................. 4
7. DELETING A USER FINGER ..............................................
8. DELETE ALL ........................................................................... 5
9. LIGHT SIGNALS TABLE ....................................................... 6
10. MAINTENANCE ....................................................................
11. TROUBLESHOOTING .......................................................... 7
12. MANUFACTURER'S WARRANTY .....................................
13. ADMINISTRATORS AND USERS LIST ............................. 45
Factory
reset
INDEX
4
5
6
7