Other Set - Samsung SCC-641(P) Manuel D'instruction

ALARM OUT
Each ALARM input corresponds to one of the 3
ALARM OUT. < The ALARM3 is designed as the
Relay OUT >
ALARM PATTERN
This sets the operation of PATTERN movements when
inputting ALARM.
When the ALARM is inputted the correspondence will
be as follows: ALARM1 input to PRESET 1, ALARM 2
input to PRESET 2, ALARM3 input to PRESET 3,
ALARM 4 input to PRESET 4, and MOTION input to
PRESET 5.
When the ALARM is working, it will stay in the PRESET
location corresponding the ALARM for the DWELL
TIME and the ALARM connected to the PATTERN will
continuously operate the PATTERN movements.
The OFF in the Setup Menu does not operate the PATTERN, and it means 1 →
PATTERN1, 2 → PATTERN 2, 3 → PATTERN 3, continuous motion of HALF1 →
PATTERN 1 + PATTERN 2, continuous motion of HALF 2 → Pattern 2 + PATTERN 3
and continuous motion of FULL → PATTERN 1+PATTERN2+PATTERN3.
AUX OUT CONTROL
This sets the ALARM OUT motion to continue or act only
when the ALARM is working.
If it is set to OFF the ALARM OUT motion will operate
only when the ALARM is set off (Active "Low"), and if it's
set to ON, the ALARM OUT will always operate
regardless of the ALARM.
3-22
ALARM OUT
ALARM1 1
ALARM2 2
ALARM3 3
ALARM4 2
MOTION 1
EXIT QUIT
ALARM PATTERN
ALARM1 OFF
ALARM2 OFF
ALARM3 1
ALARM4 2
MOTION 3
EXIT QUIT
AUX OUT CONTROL
OUT1 OFF
OUT2 OFF
OUT3 ON
EXIT QUIT

OTHER SET

HOME RETURN
When there is no KEY input or other movement for a certain time, the camera moves to
the HOME location automatically. The HOME location can be assigned from the HOME
POSITION menu.
** MAIN MENU **
CAMERA...
VIDEO SET...
Press
PRESET...
[Enter]
AUTO MODE...
ALARM SET...
OTHER SET...
SET UP TIME FOR HOME RETURN:
OFF: HOME RETURN function cancellation
© © ©
OFF 1 MIN 2 MIN 3 MIN ~ 60MIN
HOME POSITION
You can select the HOME POSITION from the preset positions numbered between 0
and 127.
AUTO FLIP
When operating the Tilt to the 90° limit using the Joystick, the camera PAN automatically
revolves 180° showing the opposite area of the Tilt area.
It gives the effect of extending the Tilt operating area 180°.
** MAIN MENU **
CAMERA...
VIDEO SET...
[Enter] KEY
PRESET...
AUTO MODE...
ALARM SET...
OTHER SET...
(OTHER SET)
HOME RETURN 12HOUR
HOME POSITION 0
AUTO FLIP ON
CAM RESET ...
LANGUAGE ENGLISH
EXIT QUIT
©
~12HOUR
(OTHER SET)
HOME RETURN 12HOUR
HOME POSITION 0
AUTO FLIP ON
CAM RESET ...
LANGUAGE ENGLISH
EXIT QUIT
3-23
E