Kimex 048-1 W Série Manuel De Montage page 23

Screen mounting
4. Install the display cover
in the ceiling cutout.
Make sure that the
threaded rods point to
the holes in the
mounting plates.
Tighten each threaded
rod with an Allen
wrench to secure the
screen. (Image 4)
5. Now place the screen
in a horizontal position
using an Allen key and
secure it in the cutout
(Image 5). Use a spirit
level to keep the screen
straight.
Suspended
ceiling
Picture 4
Threaded rods
Picture 5
7
Suspended
ceiling
Master Allen key