Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Screen mounting
Slide the fixing plates to the end of the housing and tighten the screws
2.
(picture 2). Please pay attention that the drill holes for the threaded rods are
not hidden by the crankcase.
Picture 2
3.
Drill four holes in your false ceiling or suspended ceiling and insert the metal
pegs. The gap between the drill holes should be L + 40mm x 94mm.
If the supplied material is not suitable for you, use other plugs and screws
suitable for your installation.
You can now attach the mounting brackets to your ceiling. Take special care
that the brackets are securely attached to ensure that your screen is durable
and solid. Then mount the two threaded rods to the mounting brackets and
turn with an Allen key to the height of the suspended ceiling. (picture 3)
6
Picture 3
Publicité
Table des Matières
