Fog Control; Strobe Control - Chauvet DJ Obey 40 Mode D'emploi

Fog Control

The Obey 40 has a dedicated fog button that will work with compatible CHAUVET fog
machines. See the Chauvet website for available fog machines: www.chauvetlighting.com.
To operate one or more fog machines, do the following:
1. Connect the fog machines to the fog control out port on the back panel.
Note: See the fog machine's User Manual for information on linking more than one
fog machine.
2. Turn on the fog machine or machines.
3. Wait for the Fog LED to come on.
4. Press <Fog> to generate fog.
T
he Fog LED indicates that the fog machine is at maximum temperature and ready to generate
fog. When the LED is not on, the fog machine might still generate fog, but not for the maximum
rated time.

Strobe Control

The Obey 40 has a dedicated strobe button that will work with compatible CHAUVET
strobes. See the Chauvet website for available strobes: www.chauvetlighting.com.
To operate one or more strobes, do the following:
1. Connect the strobe or strobes to the strobe control out port on the back panel of the
Obey 40.
Note: See the strobe's User Manual for information on linking more than one strobe.
2. Turn on the strobe or strobes.
3. Press <Strobe> to start the strobe.
Note: The <Strobe> button is a momentary button. The light will strobe for as long as
the button is held down. When it is not pressed, the strobe is dark.
The LED indicator for the strobe button will flash at the same rate as the strobe.
Obey 40 User Manual Rev. 9 Page 33 of 160