Control Descriptions - Chauvet DJ Foot-C Mode D'emploi

Control
Descriptions
Page 12 of 88
Button or Fader
Buttons that select lights to control and set the default DMX
addresses of the channel faders. The corresponding LEDs indicate
when a light is selected.
FIXTURE
<1>–<6>
Note: These buttons are inclusive. Pressing one, then
another, selects both lights. To deselect a light, press it again
and make sure the LED indicator is off.
The <BLACKOUT> button will darken all fixtures. To turn blackout
off, press the <BLACKOUT> button again. The <MUSIC / AUTO /
BLACKOUT
BLACKOUT> pedal will also activate and deactivate the blackout
feature.
Button used to enter the programming mode. Allows you to
PROGRAM
program a scene, chase, or sequence thereof.
Button used to delete scenes individually. Delete a scene by
DELETE pressing and holding the <DELETE> button until the LED display
flashes. <DELETE> button also controls the MIDI channel select.
Color/Control
Knobs to control the manual adjustment of red, green, blue, amber,
white and UV (000–255); or the DMX channel of the Fixtures 1–6.
Knobs
Audio
Sensitivity Knob that adjusts the board's sensitivity to sound and music.
Knob
Display that shows various types of information about current
selections and whether it is in Program or Playback mode:
·
Blackout - indicates that blackout is active and the board is not
sending DMX signals.
·
Program - indicates that the board is in Program mode.
·
LED Displays Music - indicates that the board is in Music Trigger mode.
·
Auto - indicates that the board is in Auto Trigger mode.
·
Chase - shows the current chase in Playback or Program
mode.
·
Scene - shows the current scene in Playback or Program
mode.
<MODE>
Button that switches between Chase mode and Scenes mode.
Pedal Button Hold to activate the Tap Sync feature.
<UP>
Button that moves up through banks of scenes, or up through the
steps in a chase.
Pedal Button
<DOWN>
Button that moves down through banks of scenes, or down through
Pedal Button the steps in a chase.
<FUNCTION
Button used while programming to switch between the Speed and
(ENTER)>
Fade functions, or to confirm a selection.
Pedal Button
Button used in playback to quickly switch between Music mode,
Auto mode, or to blackout all fixtures.
· To turn the blackout off, you must press and hold the <MUSIC
<MUSIC /
/ AUTO / BLACKOUT> pedal button again.
AUTO /
· While in Tap Sync mode, press the <MUSIC / AUTO /
BLACKOUT>
BLACKOUT> pedal button to the beat to set your chase
Pedal Button
timing.
Also used for toggling program modes. With program activated,
press to switch between Add and EdIT.
Description
Foot-C User Manual Rev. 2