LaserLiner MultiMeter-Pocket Mode D'emploi page 10

Read the operating instructions and the enclosed
! brochure „Guarantee and additional notices"
completely. Follow the instructions they contain.
Safely keep these documents for future reference.
Function/Application
Multimeter for taking measurements in the range of overvoltage
category CAT III up to max. 1000 V. The meter can be used to
measure DC and AC voltages and direct and alternating currents
within the speci ed ranges, as well as for continuity and diode
testing. The meter is also tted with a non-contact voltage detector
and has an integrated LED ashlight.
Symbols
Hazardous electrical voltage warning:
Unprotected live components inside the device
housing may pose a risk of electric shock.
Danger area warning
Protection class II: The test device has
reinforced or double insulation.
Overvoltage category III: Equipment in fixed
installations and for applications where specific
requirements with regard to the reliability and
availability of equipment have to be met, e.g.
circuit-breakers in fixed installations and devices
used in industrial applications which are
permanently connected to the fixed installation.
10
GB