FIELD BT OWNER'S MANUAL
CHANGING THE TUNING STEPS (9kHz or 10kHz)
MW, or medium wave stations, known as AM stations in
North America, range from 520 to 1710 KHz in North
America and from 522 to 1620 KHz in other parts of the
world. In North America they tune in 10 KHz steps and in
other parts of the world they may tune in 9 KHz steps.
The radio is set up for 10 KHz tuning by default, but to
change the steps to 9 KHz, With the radio off, long press
the PRESET button to select.
Long press to switch 9K or 10K, the LCD displays 9K or
10K.
USING THE SW RF GAIN KNOB
When listening to SW broadcast stations, this control knob
should be dialed to or near position 5. If you are listening
to a weak station, increase the gain, when listening to
extremely strong stations, decrease the gain. For listening
to Shortwave stations, place this control to maximum gain
and decrease the gain as necessary.
CHANGING THE TUNING SPEED USING THE TIMER
A / TUNING STEP BUTTON
With the radio on, short press TIMER A / TUNING STEP
button, the LCD will display:
6