FIELD BT OWNER'S MANUAL
stereo if the signal is sent in stereo and the ST position
is selected with the BANDWIDTH switch. The internal
speaker will be muted when a device is connected to the
Earphone jack.
USING THE LINE IN/OUT SOCKETS
These sockets are on the right side of the FIELD BT, an 1/8
inch stereo type (3.5 mm). An external audio device (such
as an MP3 player) can be played by connecting an AUX
line from the device into the Line-In socket. When a device
is connected to the Line-in socket the word "AUX" will be
displayed on the screen.
The Line-Out socket can be used to feed audio from the
FIELD BT to amplified external speakers. The internal
speaker will still be functional when a device is connected
to the Line-Out socket.
EXTERNAL ANTENNAS
ANT. SELECTOR SWITCH: EXT or INT
Use this switch to enable the use of FM or SW internal or
external antennas.
MW EXT. ANT. – This is a 500 ohm impedance socket, for
use with long wire antennas.
FM/SW EXT. ANT.socket – Located on the back of the radio
is primarily for antennas designed to be fed with 50 or 75
16