Bluetooth Function - Eton FIELD BT Manuel D'utilisation

FIELD BT OWNER'S MANUAL
" icon will flash in the display. Press UP/DOWN arrow
buttons to select memory address (1~10) " ", press
the ALARM/MEMORY button again to store station to
selected address and exit memory status. The user can
repeat this procedure to store other favorites, then press
PRESET button to recall memorized stations.
Note: The radio can store a total 50 memories, 10 presets for each band.
RETRIEVING STATIONS FROM PRESETS
With the radio on, press the PRESET button continuously
to retrieve the stations that have been stored. Notice
that the frequency in the display changes and the 'Preset'
number shows on the right side of the display.
A station cannot be erased from memory. Simply store
another station over it.

BLUETOOTH FUNCTION

1. Power on the radio and switch band selector to " ".
2. Short press
bluetooth of your device and select "Field" to connect
your device. Once connected, open music player on
your device to play music. Short press PLAY/PAUSE
button to play or pause the music.
3. 3. 1 Short press
your device.
3.2 Short press
the player will start playing from the beginning after 5
seconds.
4. Bluetooth status is shown on the LCD display:
"> BT MODE"
In Pairing mode,the ">" icon is flashing quickly.
to begin pairing, now activate the
button to switch the next song on
button to go back to the last song,
10