Setting The Clock - Eton FIELD BT Manuel D'utilisation

In Disconnected mode,the ">" icon is flashing slowly.
In Connected mode,the ">" icon is on all the time.
5. In order to save power, the radio will power off
automatically if the bluetooth is not paired successfully
in more than 10 minutes.

SETTING THE CLOCK

The FIELD BT's clock works in either the 12 hour or
24 hour mode. To change the clock from one mode to
another, turn the radio off, press and hold the UP button
for 1 second.
To set the clock:
1. Turn radio off.
2. Press and hold the T.SET button until the hour starts
flashing.
3. Turn the tuning knob in either direction or press the UP
button to set the hour.
4. Quick press the DOWN button and the minutes will
begin to flash, turn the tuning knob to set the minutes
5. Quick press the T.SET button to finalize the entry.
Note: If the above steps are not completed quickly enough the time set
mode will exit. If it exits, if this occurs, simply start over.
SETTING, ACTIVATING AND DEACTIVATING THE
ALARM CLOCK
With the radio off, both buttons have the TIMER A/TIMER
B function meaning that they can set two different
alarms.
FIELD BT OWNER'S MANUAL
11