CARVIN SANICLEAR 10 Manuel D'installation Et D'opération page 27

DANGER: RISK OF ELECTRIC SHOCK THAT CAN RESULT IN SERIOUS INJURY OR DEATH.
Before proceeding with any wiring, the power at the circuit breaker must be turned off. Make sure to follow all
electrical codes (local and NEC). For safe operation, the Salt chlorinator must be installed properly by being grounded
and bonded.
Input power for stand-alone use:
VERY IMPORTANT: The SANICLEAR system is to be powered only when the pump is running.
For Canada: Make sure the SANICLEAR chlorine generation system is connected to a circuit protected by a ground
fault interrupter class "A". Make sure you connect the GROUND wire to the green ground screw located on the
INSIDE WALL of the enclosure.
27