Displaying The Estimated Energy Consumption - OERTLI RS400 Notice D'installation, D'utilisation Et D'entretien

3. Operating instructions
+
MODE
EN
1 2 3 4
%
0 2 4 6 8 10 12 14
MODE
1 2 3
%
0 2 4 6 8
MODE
1
C004225-C
2"
40
5"
A000857-A
5 6 7
16 18 20 22 24
C002390-B
4 5 6 7
10 12 14 16 18 20 22 24
2
4 The current time and alternately, every 5 seconds, the outside
temperature and the room temperature
To modify the principal display, proceed as follows:
1. Press the MODE and r keys simultaneously for 5 seconds. The 1
menu is displayed.
2. Press the rotary button to display the menu 2.
To go back to the previous display, press the key r.
3. To modify the setting, turn the rotary button.
I : Outside temperature
O : Ambient temperature
I then O: Outside temperature alternating with room temperature
4. To return to the principal display, press the MODE key or wait 20
seconds.
3.2.6. Displaying the estimated energy
consumption
The remote control allows you to display the estimated energy
consumption per use. The energy consumption displayed is the running
total of consumption based on activation of the function on the heating
appliance display. It is possible to reset the estimated energy
consumption from the heating appliance display.
Display of the estimated energy consumption is only
available if the appliance is compatible. The appliance's
energy consumption estimate function must be activated.
1. Press key Cc and r simultaneously for 2 seconds. An estimated
consumption value is displayed.
2. Turn the rotary button to consult the various estimated consumption
values.
3. To return to the principal display, press the MODE key or wait 20
seconds.
CAUTION
The values displayed are estimates.
AD257
12/02/2018 - 300020550-001-03