Surface Maintenance - Zephyr Monsoon I Guide D'utilisation, D'entretien Et D'installation

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,
or steel wool/ scoring pads which will scratch and damage surface. Do not use products containing chlorine
bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless
replacing, they are required to be cleaned every 30 days or when the Clean Filter Indicator is illuminated on
the liner controls .
F
using hood.
pull towards front of liner using handles.
Cleaning the Grease Tray
gently scrubing any residue off with a soft terry cloth. Dry grease tray and re-install before using hood.
Removing the Grease Tray
Grease tray has a hooked lip that attaches to bottom panel top edge.
Remove grease tray by:
1. Pull up on tray to release from bottom panel. FIG. 7-1
2. Pull tray out of liner body. FIG. 7-2
18
www.zephyronline.com
1
2
FIG. 6
1
1
2
FIG. 7