Checking The Standard Accessories; Attaching The Light-Blocking Shield - Pioneer PDK-TS23 Mode D'emploi

Checking the Standard Accessories

Check to make sure that you have all the standard accessories before assembly and installation.
Base cover x 1
Screws (4 mm x 10 mm) x 4
1
Installation bolts
(M8 x 20 mm: black) x 2

Attaching the Light-blocking Shield

This part prevents reflection of the cables connected to the
back of the Plasma Display on the base cover.
Note
Attach it after anchoring the base cover on a flat stable
place.
Stand pipes
(left and right, interchangeable) x 2
Installation bolts
(M8 x 40 mm: black) x 2
Light-blocking shield
Base cover
Light-blocking shield x 1
Hexagonal wrench x 1
(Opposite side 6 mm for M8 use)
Operating instructions
(this document) x 1
2
Attachment Procedure
1
Remove the double-sided adhesive tape
from the light-blocking shield.
Remove each double-sided
adhesive tape.
9
En