Mounting The Camera - Rollei 500 Sunrise Mode D'emploi

Mounting the Camera

To install the camera into the frame and mount
it on its stand, do the following:
1. Need a quick-release buckle is assembling
on the adhesive mount.
2. Using your fingers, pry open the bottom of
the frame. Then install the camera into the frame.
3.Attach the frame to the adapter slot of the stand.
Then install and tighten the thumb screw.
4. Attach the adhesive mount on smooth and
clean surface.
™ NOTE : To obtain optimum adhesion, firmly
press into place when attaching the mount.
EN 25