General Information; Product Use; Product Location - Vortex VOPKGF03 Mode D'emploi

GENERAL INFORMATION

The quality and workmanship of
laboratory has given these products. The rigorous UL and ULC testing requirements are your assurance
of consistent quality, in materials and manufacturing standards, used for this chimney system.
In addition, the industry leading Warranty on
confidence in the quality of these products. Thank you for choosing Vortex!
The criteria for installation must be in conformance with the specifications contained in the latest
version of the NFPA 211 (USA) (Standard for Chimneys, Fireplaces, Vents and Solid Fuel Burning
Appliances) or CSA B365 (Canada) (Installation code for solid-fuel-burning appliances and equipment)
and local or state building codes, whichever has jurisdiction. It may be necessary to obtain permits
before installing the chimney system.
ALWAYS CONTACT YOUR LOCAL BUILDING OFFICIAL OR FIRE OFFICIAL
REGARDING PERMITS, RESTRICTIONS AND INSTALLATION INSPECTIONS IN
YOUR AREA.
This product should be installed, by a qualified chimney or venting professional, according to these
installation and maintenance instructions. Read through and become familiar with these installation
instructions before installing this product. Failure to follow these instructions may void the manufacturer's
warranty and the Standards in force for this product.

PRODUCT USE

Vortex Pellet Vent Pipe
The
CAN/ULC S609 and ULC/ORD C441 for venting listed wood or corn pellet fuel fired appliances
producing flue gas temperatures between 100°C (212°F) and 300°C (570°F)

PRODUCT LOCATION

When selecting the location for an appliance and venting pipe it is necessary to follow the NFPA 211
(United States) and CSA B365 (Canada) standards.
In addition, where possible, choose a location that will ensure that the vent system will not conflict
with floor joists, roof trusses, studs, water pipes or electric wires. It is easier to relocate the appliance
than to change the structure of the home. Also choose a location to install the vent system with as
few deviations as possible.
Installation Manual - VORTEX Pellet Vent System
Vortex Pellet Vent Pipe
Vortex Pellet Vent Pipe
in 3" (80 mm) or 4" (100 mm) diameters is tested and listed to UL 641,
is reflected in the recognition by an accredited
is a further indication of our
Page 3