LaserLiner ThermoSpot One Mode D'emploi page 8

Measurement procedure notice
This infrared temperature instrument detects the temperature of various
surfaces and materials. A built-in sensor head detects the material-specific
infrared rays emitted by every object. The amount of these emissions is
determined by the material's emission coefficient (0 ... 1). This instrument
is permanently set to an emission coefficient of 0.95, which is applicable
to most organic materials as well as plastics, ceramics, wood, rubber and
stone. Please ensure that the space between the instrument and surface
to be measured is free of disturbances (steam, gas, contamination, glass).
Laser Laser output
The laser is a targeting aid to
sight the location for the infrared
measurement. Only the surface's
temperature is measured. Set the
optimum measuring distance for
the measured spot (12:1) such that
it is completely within the target
Laser warning message
object.
08
GB