Publicité
Les langues disponibles
Les langues disponibles
Intended use of the power tool:
Hand-guided oscillator for sanding small sur-
faces, corners and edges, for sawing thin parts
of steel sheet, wood and plastic, for scraping,
polishing, rasping, cutting and separating with-
out water in weather-protected environ-
ments, using the application tools and
accessories recommended by FEIN.
Symbols.
Symbol, character
Explanation
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving
back and forth.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by
unintentional starting of the power tool.
Use eye protection during operation.
Wear hearing protection while working.
Use a dust mask during operation.
Use protective gloves during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat,
e. g. against continuous intense sunlight.
Observe the notes in the text aside!
Switching on
Switching off
Confirms the conformity of the power tool with the guidelines of the
European Community.
en
9
Publicité
