TC-14_32_us.book Seite 19 Mittwoch, 19. Mai 2004 4:48 16
TC-series
Only AC/DC cooling box:
The cooling box is equipped with an automatic priority circuit. Thus it is ensu-
red that with simultaneous connection to the alternating current circuit and to
a 12-V-battery, the alternating current circuit will be used.
8
Operation
Before you put the new refrigerator into operation, you should
clean it inside and outside with a damp cloth for hygienic reasons
(see also Chapter „Cleaning and servicing" on page 22).
8.1
Tips to save energy
A ventilator in the interior space of the cooling box provides for the
circulation of the cold air within the box. Thus a better cooling
capacity will be achieved. In order that the cold air cannot reach
the outside when opening the cooling box, this is equipped with a
switch which turns off the ventilator as soon as the lid is opened.
Select a well ventilated location which is protected against sunrays.
Let warm foods first cool down before you bin them.
Avoid an unnecessary low inside temperature!
Do not open the refrigerator more often than necessary!
Do not leave the lid or door open longer than necessary!
8.2
Switch on the cooling box
➤ Place the cooling box on a stable base.
The plug is safe against wrong polarity: You can plug it only in one
direction into the (see illustration 3, page 4) socket.
➤ Connect the cooling box
– with the connecting cable contained in the scope of delivery to the so-
cket (only AC-version) or...
Operation
19