Maintenance; Side Brushes; Side Wheels And Castor; Compartments And Filters - domoova DRV20 Manuel D'utilisation

EN

Maintenance

Side brushes

Unclip the side brushes by gently pulling them upwards and run
them under clean water. Dry side brushes well before reusing them.
The left brush is marked with an "L" and the right brush is marked
with an "R". The engraved letters on the side brushes and the robot
are there to guide you.
NOTE: Side brushes must be replaced if you notice that their original shape has
changed.

Side wheels and castor

Wipe the side wheels with a dry cloth to remove built up dust.
Firmly pull the castor or use a slotted screwdriver to remove it from
its frame and wipe it clean. Remove the axle that holds it in place and
remove any debris wrapped around. Then clean inside the castor's
cavity using a soft cloth.

Compartments and filters

Dust bin
You should empty the dust bin every time the robot completes a
cleaning cycle. Remove the robot's dust bin using its carry handle
and empty it by opening the cover using the notch on the side. Then
check that there is no debris obstructing the robot's vacuum system.
Filters
Open the dust bin to access the filters. Pull upwards firmly to remove
the filters from their housing.
Carefully shake the filters to release them from the dust particles.
18