Maintenance
Dust bin and filters
Dust bin
Empty the dust bin after each
use.
Check that the vacuum is turned
off and unplugged. Remove the
motor unit by pressing on the
release button on top of the
dust bin. Open the cover on the
bottom of the bin and empty it
(Figure 1).
NOTE: Take care when opening the
cover as the dust could fall out on to the
floor.
Motor unit
Figure 1
To clean the motor unit, open the cover by pressing the release
button (Figure 1) and remove the motor filter (Figure 2). Carefully
clean the multi-cyclonic motor with a dry cloth (Figure 3).
Figure 2
11
Figure 1
Figure 3
EN