dji INSPIRE 2 Guide De L'utilisateur page 4

Table des Matières

Les langues disponibles

Disclaimer

Thank you for purchasing the Inspire 2 Intelligent Flight Battery Charging Hub

(hereinafter referred to as "Product"). Read this disclaimer carefully before using this

Product. By using this Product, you hereby agree to this disclaimer and signify that

you have read it fully. Please use this Product in strict accordance with the document

and be sure to pay attention to the Warnings. SZ DJI TECHNOLOGY CO., LTD. and

its affiliated companies assume no liability for damage(s) or injuries incurred directly

or indirectly from improper use of this Product. Misuse includes, but is not limited

to, using unapproved chargers, charging unapproved batteries, short-circuiting,

overheating, modifying the Product, or touching the terminals with skin or metal. Refer

to the Safety Guidelines and Disclaimer, Intelligent Flight Battery Safety Guidelines,

and User Manual for applicable information not herein contained.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as "DJI") and

its affiliated companies. Names of products, brands, etc., appearing in this manual

are trademarks or registered trademarks of their respective owner companies. This

Product or manual shall be reproduced in any form without the prior written consent or

authorization of DJI.

This disclaimer is produced in various languages. In the event of divergence among

different versions, the Chinese version shall prevail when the Product in question is

purchased in China, and English version shall prevail when the Product in question is

purchased in any other region.

Warnings

1. The Charging Hub is only compatible with the Inspire 2 Battery Charger. DO NOT

attempt to use the Charging Hub with any other battery charger.

2. The Charging Hub is only compatible with TB50-4280mAh-22.8V Intelligent Flight

Batteries. DO NOT attempt to use the Charging Hub with other battery models.

3. Place the Charging Hub on a flat and stable surface when in use. Ensure the

device is properly insulated to prevent fire hazards.

4. DO NOT touch the metal terminals on the Charging Hub.

5. If there is any noticeable buildup, wipe the metal terminals with a clean, dry cloth.

Introduction

The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the

Inspire 2 Battery Charger. Four Intelligent Flight Batteries can be placed in the

Charging Hub at once, and a maximum of two batteries will be charged at a time.

The battery pair* with more stored power will be charged first. The Charging Hub will

intelligently charge batteries in sequence according to battery power levels from high

to low, if batteries are not paired. Pairing can be carried out using the DJI GO

app. The Micro USB port is used for firmware updates.

Table des Matières