Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Note: The installation site
The monitored area to be reached by the rays of the motion detector. The monitored area must not
be obstructed by objects, because infrared radiation can not penetrate solid objects.
Depending on the area to be monitored, the smaller, the better the motion detector works. You can
restrict the coverage range by placing opaque material (such as tape).
1. Turn off the power before installing.
2. Pull the cable through the gasket hole. Check carefully whether
the sealing opening in good condition is.
3. Connect the wires according fig. 5.
Fig. 5
20 | 21
Fig. 4
GB
Publicité
Table des Matières
