Iii.5.B Executive Directions - Galvamet KompaKTech Manuel D'emploi Et D'entretien

EN
III.5.b EXECUTIVE DIRECTIONS
The base must be at least cut as shown in Fig. 3.38 and the back removed if needed.
Fig. 3.38
If the installation is including the optional plasma filtering kit the cut on the base can be
reduced as shown at Fig. 3.32
Fig. 3.32
This installation of the appliance imply a maximum length of the drawers that may be
mounted under the hob (Fig. 3.39).
 Drawers depth = 450mm about
41