Galvamet KompaKTech Manuel D'emploi Et D'entretien page 90

EN
The next step is to determine the exit of the fumes according with the installation needs
(Fig. 3.16).
The air outlet can be rotated every 45 ° and thanks to the 15 ° fitting supplied with
the unit fitted in the two directions, it is possible to identify various configurations
for the outlet of the air duct.
To do this, you must cut the clamp that holds the power cable on the side of the
box, unscrew the screws that fix the octagonal box (Fig.3.17)
Fig. 3.15
Fig. 3.16
14