Iii.2.B Executive Directions - Galvamet KompaKOne Manuel D'emploi Et D'entretien

EN
III.2.b EXECUTIVE DIRECTIONS
The base of the cabinet must be at least drilled as indicated in Fig. 3.13 and the back
removed in case. If the installation includes also the plasma filtering kit (available as an
optional) the cut of the base can be reduced to 660 of large.
Fig. 3.13
Installation of the appliance imply a maximum
length of the drawers that may be mounted
under the hob:
 Upper drawers depth = 400mm
 Last drawer depth = 300mm
Fig. 3.14
14