Galvamet KompaKTech Manuel D'emploi Et D'entretien page 149

EN
E2
EA
U400
E5
E6
E8
E9
Overheating in the coils of one or
more cooking zones, for incorrect
use of the hob or for failure of the
cooling fan.
Power board error.
Fault component.
The command switches off after 1
second and emits a continuous
acoustic signal. This may be due to:
1) Supply of high voltage
2) Error connecting the hob to the
mains supply.
Fault of the power board filter.
Anomaly of the power board
Incorrect fan speed.
Error of the left or right fan.
Defect of the temperature sensor of a
cooking zone.
Get in touch with the authorized service
center quoting the error code.
Get in touch with the authorized service
center quoting the error code.
Contattare il centro di assistenza tecnica
1)
autorizzato, specificando il codice di errore
Contattare un elettricista per verifica della
2)
rete domestica.
Get in touch with the authorized service center quoting
the error code.
Get in touch with the authorized service center quoting
the error code.
Aria di scarico bloccata, ad esempio da carta.
Get in touch with the authorized service center quoting
the error code.
Get in touch with the authorized service center quoting
the error code.
tecnica
tecnica
73