Standard Operation - Fan Mode - Friedrich J Série Manuel D'installation

Standard Operation - Fan Mode

FAN
SPEED
TEMP
•
Ventilation drive does not release cool wind but general fan
•
Because it releases the wind that has no temperature difference from the room, it functions to
circulate the inside air.
•
The menu item of wind powerfulness might not be partially selected according to the product.
1
2
3
OPER
MODE
After operating the product by pressing
the button, set up the fan operation by
pressing the button.
OPER
MODE
When the dry operation is selected, "Fn" will
be shown on the display window as shown
on the left side.
- The temperature setting can not be
adjusted during operation this mode.
FAN
Press the button to select airflow rate
SPEED
[Lo→Med→Hi].
When running ventilation, compressor of
AHU doesn't work.
Operating Introductions
Owner's Manual 11