Function Setting - Child Lock - Friedrich J Série Manuel D'installation

Operating Introductions

Function setting - Child Lock

It is the function to use preventing children or others from careless using.
FAN
SPEED
TEMP
14 Air Conditioner
1
2
OPER
MODE
3
During the operation, when pressing the
button and button for approx. 3 seconds,
FAN
SPEED
the 'Child Lock' Function can be used.
- At the time of initial setting of the 'Child Lock',
the 'CL' Will be indicated approx. 3 seconds
at the temperature Display section before
resuming to the previous mode.
After the setting of the 'CL', if another button
is setup, the button can not be recognized as
the 'CL' is indicated at the temperature
display section for approx. 3 seconds.
If the 'CL' function is wanted to be used
under the operation standby state, press the
button and FAN
SPEED
3 seconds under the standby mode state and
the system will be the 'CL' state.
As for the releasing method, when pressing
the Button and
seconds, the 'CL' function can be released.
Button for approx.
FAN button for approx. 3
SPEED