Symbols Machine /Operating Instructions; Proper Use; Residual Risks; Safety Instructions - ATIKA KSG 220 A Notice Originale

Symbols machine
Carefully read operator's manual before handling
the machine. Observe instructions and safety
rules when operating.
Shut off engine and remove power cord before
performing cleaning, maintenance or repair work.
Attention! Risk of cutting! Do not hold hands into
the rotating disc!
Wear protection gloves.
Wear dust protection.
Wear eye and ear protection.
Electrical devices do not go into the domestic rubbish.
Give devices, accessories and packaging to an
ecofriendly recycling.
According to the European Directive 2002/96/EC on
electrical and electronic scrap, electrical devices that
are no longer serviceable must be separately collected
and brought to a facility for an environmentally
compatible recycling.
Symbols Operating instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or
cause damage to property.
Important information on proper handling. Not
observing this instruction can lead to faults in the
machine.
User information. This information helps you to
use all the functions optimally.
Assembly, operation and servicing. Here you
are explained exactly what to do.

Proper use

The chain sharpener is only intended to be used in the do-
it-yourself and craft area. In the standard version with
mounted grinding wheel (100 x 3.2 x 10 mm, 63 m/s), the
chain sharpener is only intended to sharpen chains used in
hobby applications (6.35 mm (1/4"), 9.52 mm (3/8")
hobby and 8.255 mm (0.325") chains).
An optional grinding wheel (100 x 4.5 x 10 mm) is available
for professional cutting chains.
The device may not be used to sharpen other objects.
Otherwise, there is a risk of injury.
Use only grinding wheels suitable for the machine.
Only chains may be worked that can be put down and
guided securely.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by
the manufacturer and following the safety instructions
included in the instructions.
The relevant accident prevention regulations for the
operation as well as the other generally acknowledged
occupational medicine and safety rules must be complied
with.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Arbitrary modifications of the chain sharpener void the
liability of the manufacturer for damages of all kinds
resulting from them.
Only persons familiar with the chain sharpener and
instructed about possible risks are allowed to prepare,
operate and service this device. Repair work may only be
performed by us or authorized service agencies.
The machine may not be used in a potentially explosive
environment or be exposed to the rain.

Residual risks

Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety information" and
the "Intended usage" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the equipment.
Risk of injury to fingers and hands by touching the running
grinding wheel.
Risk of injury to fingers and hands by touching the grinding
wheel in areas not covered.
Risk of injury by flying sparks.
Inhalation of grinding dust.
Danger resulting from electric current, if improper
connecting wires are used.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.

Safety instructions

Chain sharpeners can be dangerous when used
improperly. The use of electrical tools requires the
observation of basic safety precautions to eliminate risk
of fire, electrical shock and personal injuries.
Before commissioning this product, read and keep to the
following advice. Also observe the preventive regulations
of your professional association and the safety provisions
applicable in the respective country, in order to protect
yourself and others from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
11