Ec Declaration Of Conformity; Characteristic Noise Values; Vibrations; Extent Of Delivery - ATIKA KSG 220 A Notice Originale
Masquer les pouces
Voir aussi pour KSG 220 A:
- Notice originale (128 pages) ,
- Instructions d'utilisation (96 pages) ,
- Notice originale (140 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not operate machine before having read the
operating instructions, understood all the notes
and assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
EC Declaration of Conformity
according to EC Directive 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97, 59227, Ahlen - Germany
herewith declare under our sole responsibility that the product
Sägekettenschärfer (Chain sharpener) KSG 220 A
Serial number: see last page
is conform with the above mentioned EC directives as well as
with the provisions of the guidelines below:
2004/108/EG und 2006/95/EG.
Following harmonized standards have been applied:
EN 61029-1:2009; EN 61029-1:2000+A11:2003+A12:2003;
EN 55014-1:2006+A1:2009;
EN 55014-2:1997+A1:2001+A2:2008;
EN 61000-3-3:2008; EN 61000-3-2:2006+A1:2009+A2:2009
Keeping of technical documents at:
ATIKA GmbH & Co. KG - Technical department
Schinkelstr. 97 - 59227 Ahlen - Germany
Ahlen, 10.05.2010
A. Pollmeier, Geschäftsleitung
Characteristic noise values
DIN EN ISO 3744; 11/95, DIN EN 11201
Application of the machine as chain sharpener with standard
grinding wheel.
Noise power level
L
= 91 dB (A)
WA
10
The values given are emission values and must therefore not
10
simultaneously represent safe workplace values too. Although
10
there is a relationship between emission and immersion levels, it
10
can be reliably deduced whether additional precautionary
11
measures are necessary or not. Factors, which can influence the
11
immersion level currently existing at the workplace include the
11
duration of the effects, the special type of the workroom, other
11
noise sources, etc. e.g. the number of machines and other
13
adjacent processes. The permissible workplace values can also
13
vary from country to country. This information should however
enable an improved assessment of the danger and risk to be
13
carried out.
14
14
15
Vibrations
15
15
Vibration level: = 3.52 m/s²
15
Measuring uncertainty : K=1.5
15
The indicated vibration emission level has been measured
according to a standardised test method and can be used to
compare power tools.
It can also be used for an initial estimate of exposure.
Warning!
The vibration emission level can differ from the indicated value
during actual use of the power tool depending on the manner of
usage.
It is necessary to define safety measures to protect the operator
that are based on an estimate of exposure at the actual
conditions of usage (for this, all parts of the operation cycle have
to be considered, e.g. times during which the power tool is cut off
and times during which it is switched on but runs in no-load
mode).
Extent of delivery
• Chain sharpener KSG 220 A
• Rotary table, complete
• Chain stop
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier
or the manufacturer immediately. Complaints made at a later
date will not be acknowledged.
10
Sound pressure level at the workplace
L
= 78 dB (A)
PA
• 1 pair of carbon brushes
• Mounting nut
• 1 operating manual
Publicité
Chapitres
Table des Matières
