Roth DWT plus 3 620 Instructions De Montage Et De Service page 22

Row, block, angled installation
Row (up to 5 tanks),
block (2-25 tanks)
and angled instal-
lation (3-14 tanks)
D
GB
F
I
NL
Pre-assemble supply-collector line with safety valve
(halve the intake pipe according to the packing slip
of the block accessories) and ...
... connect the free ends of the suction assembly
line of the tank rows. Pre-assemble safety valve
(observe positioning of the collector fitting with
safety valve according to Fig. 2).
Pre-assemble filling line manifold, lubricate O-rings
and ...
... connect the free ends of the filling line of the
tank rows .
Observe positioning of the fill connection for the
point of installation of the overfill prevention de-
vice (1st tank in fill direction).
Pre-assemble ventilation manifold and ...
15
16
17
18
19
22
additional with dWt plus 3 1000 l