Single Tank Installation - Roth DWT plus 3 620 Instructions De Montage Et De Service

Single tank installation

ventilation
Only filling pipes with green cap nuts may be connected to each other (6 mm nozzle).
1
2
3
suction
Install tank onto mounting frame. Screw fill-level
meter into the bushing of the 3rd tank connection .
Install fill connection with angled filling element
(with screen) and angled fill pipe on the first tank
connection with dip pipe installed, remove protec-
tive hose from the nozzle beforehand, lubricate
o-rings .
Pre-assemble suction assembly fitting with an
overfull prevention device and quick-action shut-
off valve.
17
Measurements and
wall clearances in mm
DWt 620/1000 l
fig. 1
D
GB
single tank
installation
F
I
NL