KOBE RA0230SQB Manuel D'installation Et Mode D'emploi page 10

Duct Cover Installation
6. Use 8" round steel pipe (follow building codes
in your area) to connect the ducting transition
on the hood to the ductwork above. Use duct
tape to make all joints secure and air tight.
Refer Figure 7.
7. Use four 3/16" x 3/8" screws (included) to attach
duct cover to hood. Refer to Figure 8.
Install Accessories
8. Place baffle filters underneath the hood. Refer
to Figure 9.
Final Assembly
9. Turn power ON in control panel.
lights and fan operation.
10. Make sure to leave this manual for the
homeowner.
Figure 7
Figure 8
Check all
Figure 9
8