Binks TROPHY Serie Manuel De Service

SERVICE MANUAL
EN
HVLP, LVMP & CONVENTIONAL (3465-XXXX-XXXX)
Binks Trophy Series Automatic Spray Gun is the premier
spray gun for use in automatic spray applications,
incorporating some of the best features of our Trophy
hand spray gun. Trophy Automatic gun offers total control
of atomizing air pressure, side port air, fluid flow, and
spray patterns in high and low production settings. Latest
advancements in atomization technology have been
incorporated for achieving consistent, fine finishes when
spraying a wide range of industrial coatings.
All product contact surfaces are manufactured from FDA
acceptable materials when using a 45-11050-XX,
45-11060-XX series fluid nozzle and a 47-6860, 47-6864,
47-6865, 47-6866 needle.
Binks Trophy Automatic Series Spray Guns can be used
with pressure pots and pumps.
Binks Trophy Series Spray Guns are offered in three
different atomization technologies: HVLP, LVMP and
Conventional.
The Trophy HVLP Series of Spray Guns can be used to operate at high transfer efficiencies in
compliance with "California South Coast Air Quality Management District" regulations as a
It is the customer's responsibility to have all operators and service personnel read and understand this
manual. Contact your local Binks representative for additional copies of this manual.
READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT.
77-3049-R2.7 (8/2017)
BINKS "TROPHY" SERIES
AUTOMATIC SPRAY GUNS
High Volume, Low Pressure spray gun.
IMPORTANT! DO NOT DESTROY
II 2 G X
SPECIFICATIONS
Maximum Air Pressure
Maximum Fluid Pressure
Gun Body
Cylinder Air Pressure to
Operate the Gun
Fluid Path
Fluid Inlet Size
Air Inlet Size
Gun Weight
Wetted Parts
Gun Mounting Hole
1 / 20
140 psi / 9.6 bar (P-1)
140 psi / 9.6 bar (P-2)
Anodized Aluminum
65 psi / 4.5 bar
Stainless Steel
3/8" NPS / BSP(m)
1/4" NPS / BSP(m)
20.8 oz. / 590 grams
Stainless Steel &
UHMWPE
1/2" diameter
www.carlisleft.com