Fan Speed; Timer Mode - Friedrich ZoneAire Compact P08SA Manuel Du Propriétaire

DISPLAY FUNCTIONS
5. L.E.D. DISPLAY
The display indicates the current setting temperature or the timer setting. When the set temperature or
the timer is adjusted, the new setting is shown then the display returns the current set temperature.
The display is also used to show error codes should a fault occur, see TROUBLE SHOOTING.

6. FAN SPEED

Rotate the dial in clockwise direction, the speed changes from F1 (Low) → F2 (Medium) → F3 (High)
→ AU (Auto)
Rotate the dial in counter-clockwise direction, the speed changes backwards from AU (Auto) → F3 (High)
→ F2 (Medium) → F1 (Low)
In COOLING mode, fan speeds are available from F1 (Low), F2 (Medium), and F3 (High) to AU (Auto).
Default fan speed is in F2 (Medium) speed. Rotate the knob to F1 (Low) → F2 (Medium) → F3 (High)
→ AU (Auto) fan speed.
If "AUTO" is selected (During cooling function),"HIGH" or "MEDIUM" or "LOW" will be selected automatically
according to the difference between setting temperature and ambient temperature.

7. TIMER MODE

TIMER scale: from 0 to 24 hours.
- Use the TIMER to set the Auto-Off time during operating or in Stand-By mode
- While setting the TIMER, use the
- With each press of the TIMER key, the value on the display will increase from"00"→"01"......→ to"24"
and back to "00" again.
- Set the Auto- On / Auto- Off timer:
- Press the key to preset the Auto-Off timer, and the display will flash the setting time. The display will
return to show operating mode after 5 seconds.
- Press the
key before the preset time to cancel the Auto-Off timer, and the unit will be turned off directly.
- While setting the Auto-On timer, you can preset the functions at the same time.
- Press the key to set the Auto-On timer. After setting up, the display shows the rest of time.
- Press the key
before the preset time to cancel the Auto-On timer, and the unit will be turned on directly
- After setting up the Auto-On timer, the unit is still available to be controlled or be switched to other functions.
key or the dial is available to adjust to the desired time.
7