Rear Panel Connections - Viscount Canticus 50 Guide Rapide

4. [OUTPUT] sockets: RCA sockets to output the non-amplified signal, for connecting optional
amplified speakers, remote amplification systems or recording systems. For monophonic signals
connect to the [L(MONO)] socket only.

2.5 REAR PANEL CONNECTIONS

1. [EXT. +12V DC] connectors: these sockets can be used to obtain the +12V DC voltage
needed to supply the VISCOUNT speakers connected to the [OUTPUT].
The external boxes can be switched on and off by using the [EXT.SPK.] switch located
underneath the left side panel.
2. [OUTPUT] Section: this section contains four line outputs for the external organ amplification.
By means of the internal set up functions, which can be called up using the central control unit, it
will also be possible to edit various parameters for these audio outputs (individual volumes,
delays and equalizations) and to set these outputs in such a way as to simulate the wind chests of
the original church organs.
These functions called EXTERNAL OUTPUTS CONTROL and EXTERNAL VOICES
ROUTER are described respectively in chapter 6.2 and 6.4 of the Advanced guide.
Quick Guide – Viscount Canticus50
EN - 10