Viscount Canticus 50 Guide Rapide page 39

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Viscount Canticus 50 – Quick Guide
WARNING!
» In order to reach a proper pipes simulation, you have to locate the speakers boxes according
to the output numbers. The speaker box connected to output [1] has to be located on the
extreme left followed by all other speakers connected to outputs [2], [3] and [4] will be
located to the extreme right.
» The volume controls for the manuals and the pedal board placed in the central control unit
(see par. 3), affects as well as the expression pedals the levels of the audio output signals
[OUTPUT] found on the back panel and in the panel underneath the manuals. The only
control that does not affect these outputs is the [GENERAL] trimmer.
3. [INPUT] section: this section contains the inputs through which the output signal of external
equipment is amplified with the organ's internal amplification system.
The connections are as follows:
[L(+R)], [R]: stereo line inputs for connecting instruments with line outputs. For mono
sources use only the socket [L(+R)].
[MIC]: Microphone input for amplifying any signal coming from a microphone.
[GAIN]: trimmer for adjusting the input signal connected to the [MIC] input.
EXAMPLE OF REAR OUTPUTS CONNECTIONS
EN - 11

Publicité

Table des Matières
loading

Table des Matières