Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ally regardless of the available light.
2
Compose the picture and shoot.
Lightly press the shutter release
button.
Make sure the orange and green
LEDs light up, then depress the
shutter release button all the
way to take the picture.
•If the orange LED is blinking, lightly
press the shutter release button again
after approx. 6 sec. and wait for the
orange LED to light up before shooting.

Slow sync flash mode

Use this mode to obtain the correct exposure for both the main subject
and background in low-light situations or at night.
1
Press the
J
button until
"
"appears on the LCD
panel.
•Since slow shutter speeds are usually
selected in this mode, use a tripod to
prevent camera shake.
•When the subject is bright, "
appears on the LCD panel and flash
does not fire. In this case, no oragne
LED lights up.
2
Compose the picture and shoot.
Lightly press the shutter release
button.
Make sure the orange and green
LEDs light up, then depress the
shutter release button all the
way to take the picture.
#
"
•If the orange LED is blinking, lightly
press the shutter release button again
after approx. 6 sec. and wait for the
orange LED to light up before shooting.
E
23

Publicité

Table des Matières
loading

Table des Matières