Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Removing the film

E
1
The film starts rewinding
automatically.
•At the end of the roll of film, film
rewinds automatically and the frame
counter counts backwards one by one
as the orange LED blinks.
•If you want to remove the film while the
number of available frames still appears
on the LCD panel, rewind the film
midway through the roll. (- P. 19)
18
2
Make sure the blinking
"´ " is visible on the LCD
panel.
•When the film is completely rewound,
"´" blinks.
•If film rewind stops midway through the
roll due to a dead battery, it resumes
automatically as soon as the battery is
replaced.
3
Open the cartridge chamber
cover and remove the film.
Do not open the cartridge chamber
cover until "´" starts blinking.
•When opening the cartridge chamber
cover, make sure that the camera
bottom faces up, or the cartridge may
fall out.

Publicité

Table des Matières
loading

Table des Matières