Remote Control - Insignia NS-42PDP Guide De L'utilisateur

Insignia NS-42PDP 42" Plasma TV

Remote control

Note
This remote control is a universal remote control. If it does not
seem to work with your TV, press the TV button.
Note
For instructions on programming the remote control, see
"Programming the remote control" on page 21.
Note
The remote control buttons labeled A, B, C, D, and E do not
have any functions for this TV. They may, however, be used
with other devices when this remote is used as a universal
remote control. The exact function depends on the specific
device being controlled.
Button Description
1 SET Press to program the remote
control. For more information,
see "Programming the remote
control" on page 21.
Button
2 Device buttons
3 Number buttons
4 INPUT
5
6 + CH –
7 MUTE
8 MENU
9
10
11
12
13
14 MTS/SAP
15 ZOOM
16
17 LED
18 —
19 + VOL –
20 INFO
21 EXIT
22
23
www.insignia-products.com
Description
TV–Press to select the TV.
DVD–Press to select a connected
DVD player.
CBL–Press to select cable or
satellite TV.
AUX–Press to select a device
assigned to this button.
Press to enter channel numbers.
In the on-screen menu system,
press to enter your parental
controls password.
Press to select the video input.
Press to go to last viewed
channel.
Press to change TV channels.
Press to mute the sound.
Press to open the on-screen
menu system.
Press the arrows to move down,
OK
up, left, or right in the on-screen
menu system.
Press the OK button to confirm
changes or to toggle options on
and off in the on-screen menu
system.
When playing a DVD, press to
freeze the screen image. Press
again to unfreeze the image.
Press to start a recording on a
connected device, such as a VCR.
Press to fast-reverse on a DVD or
CD if a DVD or CD player is
connected.
Press to skip the previous chapter
on a DVD or previous track on a
CD if a DVD or CD player is
connected.
Press to select one of the preset
audio modes. You can select
MONO, STEREO, or SAP.
Press to select the aspect ratio.
Press to turn on your TV or put it
into Standby mode.
Lights when you are
programming the remote control.
For more information, see
"Programming the remote
control" on page 21.
Press to select a sub-channel. For
more information, see "Selecting
a digital sub-channel" on page 15.
Press to adjust the volume.
Press to display status
information.
Press to close the on-screen
menu system.
Press to start DVD or CD playback
if a DVD or CD player is
connected.
Press to stop DVD or CD playback
if a DVD or CD player is
connected.
7